What Things To Check Before Going To The Electrical Repairs & Service Shop.
Electrical repairs are important after accidents, fires or damages. For the electrics to work properly you need to take good care of it. You can follow some simple steps that will help you in keeping your electrical appliances safe and functional. It is wise for homeowners to check their equipment before sending it out for repairs.Before you take your electronic appliance to The Electrical Repairs & Service In Mumbai, make sure ofthe following points
1.
The cord is undamaged and not frayed. If it is, replace it with a new one as
soon as possible. Never attempt to repair a damaged cord yourself. Keep the
tools away from children. The tool and the cord may be hot after use.
2.
Do not take your appliance to a service shop without first checking that it is
properly grounded to prevent electrical shocks or fire hazards. Ongoing
maintenance of grounding should always be under control by the local electric
authority, because if incorrectly done can cause severe damage to electronic
equipment/appliances and injury to personnel.This grounding should always be
checked every time before you take the appliance to a service shop. If there is
no ground wire, make sure that it has been attached securely.
3.
Unplug the cord from any receptacles before inspecting for damage such as
dents, cracks or burning. The plug should fit securely into the receptacle.
Occasionally, a service person will disconnect or remove a receptacle cover for
your safety and convenience. When this happens, make sure that it has been
refastened in place properly after servicing.
4.
Make sure that all switches are off before removing any covers to avoid shock
or fire. If parts inside the cover fall out or break, they should be replaced
and secured in place properly.
5.
Make sure your appliance is unplugged and turned off before changing any light
bulbs. Turn the bulb carefully until it comes into contact with the socket.
Never leave a hot bulb unattended.
6.
To disconnect an appliance from the power supply, always pull the plug from the
outlet, not the cord. This will reduce shock hazard and prolong the life of
your appliance.
7.
Make sure all cords are placed carefully to avoid damage or wear on them at any
point where they connect to a receptacle, switch, or other appliance. Never
attempt to repair a damaged cord yourself. Keep the tools away from children.
The tool and the cord may be hot after use.
Final
Thought
There
are many problems in electrical appliances which the users may encounter while
they are using. The most common one is water leakage in different appliances.
But, if you want to save your appliance from these damages then keep checking
the above mentioned things before taking it for
Electrical Repairs &
Service In Mumbai.
Comments
Post a Comment